Sản phẩm | Cty TNHH MTV TM DV Hàng Hải & Dầu Khí Á Châu

Video Clip

Thông tin liên hệ

Văn phòng tại TP HCM:

CÔNG TY TNHH MTV TM DV HÀNG HẢI VÀ DẦU KHÍ Á CHÂU

21 Huỳnh Tịnh Của, Phường 8, Quận 3, Tp.HCM

Tel: 08.3820 5367

Fax: 08.3820 5370

Email: takeshi.dan@gmail.com

Đối tác

Khách hàng

Sản phẩm THIẾT BỊ NGÀNH DẦU KHÍ Van hàng hải

Air Vacuum Relief Valve

Valve provides an automatic air exhaust function on the valve so as to avoid creating water hammer in the pipeline.
Automatic exhaust of air in the pipeline will prevent the pipeline to be damaged by air pocket and ensure smooth water flowing.
In order to perform good quality, strong abrasion-resistant bronze / Stainless steel / ductile iron coated with suitable paint for intended service etc. are used as shown on the material table.

Damper Valves

We offer finest quality damper valves that are fabricated from qualitative materials. The damper valve has a throttling arrangement which permits fluid flow in one direction and limits fluid flow in the opposite direction but permits essentially unlimited fluid flow in both directions as long as the pressure difference across the damper valve is below a predetermined threshold value so as to permit unrestricted normal steering movements of the vehicle steering system.

Check Valve

check valve also called one-way valve or non-back valve, and it's used for prevent the media flew back in the pipeline. The end valve of Water pumps also belong to a check valve.
Divided by the structure of a check valve, it can be divided into three types, the rising check valve, Swing Check Valve and butterfly check valve.

Gate valve

The gate valve is divide into two big types by sealing surface configuration, include wedge-type gate valve and parallel-type gate valve, wedge gate-type valve can be divided into: single-disc gate valve, double-disc gate valve and flexible-disc gate valve; the parallel-type gate valve can be divided into single-disc gate valve and double-disc gate valve. According to location of the thread on the stem, the division can be divided into rising gate valve and non-rising gate valve.

Van Cầu

Globe valve is a type which disc along the valve seat centerline movement. It's very suitable for control the medium, because of this type of valve's stem opening or closing at a short trip, and it has very reliable breaker function. Therefore, this type of valve is suitable for cutting, adjusting and throttling the medium.

Van Bi

Van Cần Đẩy

Van An Toàn

Van Bướm

The butterfly valve is a type of flow control device, typically used to regulate a fluid flowing through a section of pipe. The valve is similar in operation to a ball valve. A flat circular plate is positioned in the center of the pipe. The plate has a rod through it connected to an actuator on the outside of the valve. Rotating the actuator turns the plate either parallel or perpendicular to the flow. Unlike a ball valve, the plate is always present within the flow, therefore a pressure drop is always induced in the flow regardless of valve position.

Tổng công: 9 Sản phẩm